Glass Rinsing Drip Tray 460mm x 180mm

To get the best pour possible you want to make sure your glass is free of dust, debris, and dish soap residue. The easiest way to do this is with a quick rinse of cold water right before pouring beer into the glass. 

This drip tray features a push-activated jet that can be hooked up to a pressurized keg or main water supply. To give your glass a quick spritz, simply press it down on the rinsing platform to activate the jet. 

The drip tray also has a pre-plumbed drain outlet to run to a nearby bucket or drain. For best results feed the jet clean, cold water at a pressure between 15 to 60 psi. If directly connecting to your main water supply, we recommend using an inline regulator to lower the water pressure as needed.

46cm (18") Glass Rinser Drip Tray

To get the best pour possible you want to make sure your glass is free of dust, debris, and dish soap residue. The easiest way to do this is with a quick rinse of cold water right before pouring beer into the glass.

This drip tray features a push-activated jet that can be hooked up to a pressurized keg or main water supply. To give your glass a quick spritz, simply press it down on the rinsing platform to activate the jet.

The drip tray also has a pre-plumbed drain outlet to run to a nearby bucket or drain. For best results feed the jet clean, cold water at a pressure between 15 to 60 psi. If directly connecting to your main water supply, we recommend using an inline regulator to lower the water pressure as needed.

Specifications
- Drain outlet - 12.7mm (1/2") OD
- Water inlet - 6.35mm (1/4") OD
- Glass Rinser - 107.95mm (4.25") diameter
- Drip Tray - 460mm x 180mm x 30mm (18.1" x 7.1" x 1.2")
- Made from 304 stainless steel